Nymi Band Management
This chapter provides information about to how manage and maintain the Nymi Band.
-
Removing the Nymi Band
When their shift ends, the user should remove and safely store their Nymi Band. -
Storing the Nymi Band
This section provides recommendations for storing the Nymi Band when it is not in use. -
Charging the Nymi Band
The Nymi Band is charged by placing it on a Nymi Band charger. The Nymi Band charger receives power from standard USB ports. It takes up to two hours to charge a fully depleted Nymi Band. A fully-charged Nymi Band typically has a 3-day battery life based on 300 BLE or NFC taps over 10 hours per day. Charging must occur in a temperature controlled environment inside the range of 15 to 30°C (59 to 86°F). This will ensure the Nymi Band charges in a timely manner and will maintain the longevity of the battery. -
Managing Battery Life
If the battery reaches a critically low level, the screen displays the critically low charge image, and then Nymi Band vibrates and shuts down. -
Exiting Sleep Mode
To conserve battery life, the Nymi Band goes into sleep mode in the following situations: -
Authenticating User Identity to the Nymi Band
-
Cleaning the Nymi Band
For recommendations on cleaning the Nymi Band, refer to the Nymi Band 3.0 Cleaning Recommendations Guide. -
Restarting the Nymi Band
While troubleshooting an issue, you might be required to restart, or reboot, the Nymi Band. -
Determining the Nymi Band Firmware Version
When troubleshooting an issue, you might require the Nymi Band firmware version. Perform the following steps to determine the firmware version on a Nymi Band.
Comments
0 commentsPlease sign in to leave a comment.