Determining the Firmware Version on Nymi Band 4.0

Determining the Firmware Version on Nymi Band 4.0

While you troubleshoot an issue, you might require the Nymi Band firmware version. Perform the following steps to determine the firmware version on a Nymi Band.

  1. Remove the Nymi Band from the wrist of the user.
  2. Put the Nymi Band on the charger.
  3. Tap your finger on the fingerprint sensor 3 times.
    The firmware version appears on the screen, as shown in the following figure.
    Figure 1. Nymi Band firmware version

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.