1. Nymi
  2. Tutorials
  3. How to Articles

Viewing the Band Label

Updated
Debbie Redmond

When you configure the policy to assign a Band Label during enrollment, the label appears on a Nymi Band that is:

  • On-body and authenticated (on your body and fingerprint accepted)
  • Off body and deauthenticated (not on your body and the band did not accept the fingerprint)
  • Off body and on the charger

On-Body and authenticated

While on-body and authenticated, when a user presses the top button twice on the Nymi Band, the screen scrolls to the Band Label screen. The screen displays for two seconds and then dims for 15 seconds before it turns off.

The following image provides an example of the Band Label screen.

Figure 1. Band Label on an enrolled and authenticated Nymi Band
Note: After the Band Label is set during the enrollment workflow, the user cannot modify the Band Label without performing the Delete User Data process. For more information see, Deleting User Data .

Deauthenticated

While an enrolled Nymi Band is off body (not being worn and therefore not authenticated), the Nymi Band screen displays the Band Label above the battery status icon.

The following image provides an example of the Band Label on an unauthenticated Nymi Band

Figure 2. Band Label on an unauthenticated Nymi Band

Enrolled and Charging, or on the Charger

When an enrolled Nymi Band is charging, the Nymi Band screen displays the Band Label above the charging icon.

The following figure provides an example of the Band Label while the Nymi Band is charging.

Figure 3. Band Label on a charging Nymi Band
Parent topic: Using the Nymi Band

Articles in this section

See more
Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.