The MDM device profile defines the positioning of the Nymi Band near the Bluetooth adapter that the Nymi Application requires
to complete an authentication task.
If your configuration allows users to override the settings directly on the iOS
device, perform the following steps.
-
On the iOS device, navigate to
-
In the Profile Settings section, touch Nymi Band Tap, as shown in the following figure.
-
On the Nymi Band Tap screen, adjust the profile setting.
Note: You can use the Nymi Calibration tool to
determine the optimal profile setting. The Nymi Connected Worker Platform—Deployment Guide provides more information.
- To increase the detection sensitivity of the Nymi Band, select a smaller profile value. Lower
values reduce the distance between the Nymi Band
and Bluetooth adapter that the Nymi Application requires to complete an authentication task.
- To decrease the detection sensitivity of the Nymi Band, select a higher profile value. Higher
values increase the distance between the Nymi Band and Bluetooth adapter that the Nymi Application requires to complete an
authentication task.
-
Retest the Nymi Band tap.
Comments
0 commentsPlease sign in to leave a comment.