Determining Nymi Band 2.0 Firmware Version

When troubleshooting an issue, you might require the Nymi Band firmware version. Perform the following steps to determine the firmware version on a Nymi Band.

1. Remove the Nymi Band from the employee's wrist.

2. Put the Nymi Band on charge.

3. Press and release the bottom button.

The firmware version appears on the screen, as shown in the following figure.
Determining_Nymi_band_Firmware_Version_-_Fig_2.png
Figure 1. Nymi Band firmware version

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Article is closed for comments.